Infant Radiant Warmer with Fixed Baby Cradle and Drawers Manufacturer,Supplier and Exporter in India

Infant Radiant Warmer with Fixed Baby Cradle and Drawers

Product Code : PHICE-11435

Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

Specifications:
Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
Slots for sensor and ventilator tubing
Side tray for placement of monitor
Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
Continuous head up/down facility
X-Ray cassette holder
Stainless steel infusion rod with facility to mount Syringe/infusion pump
Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
Distance between baby bed and heater: 33" (840 mm)
Mattress size: 30" (762 mm) x 20" (508 mm)
Height of side panel above baby bed: 5.75" (145 mm)
Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
Bed to Floor Height : 37.5" (950 mm)

Performance/Electrical Specifications :
Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
Keypad lock facility
Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows
Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
 
 

Alarm Condition

Alarm Messages on LCD

Skin Sensor is unplugged /Faulty

Skin Sensor Fail

Air Sensor is unplugged /Faulty

Air Sensor Fail

Measured skin temperature higher than set temperature by 1.0°C

Skin Temp. High

Measured skin temperature lower than set temperature by 1.0°C

Skin Temp. Low

Measured skin temperature higher than 38.0°C (With cut-off)

Skin Over Range

Measured skin temperature lower than 34.0°C

Skin Under Range

Measured air temperature higher than set temperature by 1.5°C

Air Temp. High

Measured air temperature lower than set temperature by 3.0°C

Air Temp. Low

Measured air temperature higher than 39.0°C (With cut-off)

Air Over Range

Heater power is 100% for more than 15mins

Chk Sens Position

Heater is unplugged or faulty

Heater Open

Heater Power drive fail/uncontrollable

Chk. Pwr. Drive

Power Fail Alarm: Audio with LED indicator